Gate does not stop on opening

Post Reply
Flippie
Posts: 1
Joined: Sat May 04, 2019 12:43 pm

Gate does not stop on opening

Post by Flippie » Sat May 04, 2019 12:47 pm

Good day?
If i open my gate it goes past the limit switch and keep on running what can the problem be ?

Christopher
Posts: 1
Joined: Thu Apr 18, 2019 7:38 am

Re: Gate does not stop on opening

Post by Christopher » Mon May 06, 2019 8:44 am

Good Morning

Please check the following:
1. If your gate reaches the open or close limit, does the open or close light on the PCB come on?
2. That your PCB is screwed on the plastic cover

If the close light does not come on, it might be the limit switch or the wires from the limit switch to the PCB.
Ensure your limit wires make good contact.
To test if it is your limit wires, plug out the white and brown wires at the PC Board and bridge the top or bottom two pins with a screw driver.
If the open or close light comes on, then it is your limit wires.

In order to do other tests as well, please provide your contact details and we will phone you when your at the gate motor.

Thank you.

sjhattingh
Posts: 1
Joined: Fri Nov 15, 2019 4:54 pm

Re: Gate does not stop on opening

Post by sjhattingh » Fri Nov 15, 2019 4:58 pm

Please contact me. I have difficulties with my dts500 gate motor on opening and closing.
Thank you
Sarel Hattingh
0826304493.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest